PVP-X00-GINDE Труба Tybe PEX-B
Properties of Ginde aluminum plastic composite pipe
1.Pipe that shall be co-extruded from mould. In contrast to other techniques, it features excellent fluidity for hot-melt adhesive and higher adhesion strength with EVOH.
2.On line inspection for the increase of pressure: After pressure rises to 0.6-0.8 Mpa, EVOH tightly connects with plastic. Adhesion strength then has been improved.
3.Synchronization computer controller: In the whole production line adopts computer controlling, when production velocity changes, it only requires to input digits of production velocity, and other parameters by computer automatic controlled.
4.Optic inspection apparatus: Pipe wall quality and outer diameter for pipe controller. It features as higher temperature and pressure endurance, higher elasticity, lower creep resistance properties and without corrosion. Widely usage application: Cold and hot water cycling system, air conditional system, heating system.
Advantage:
1.Excellent lower temperature resistance, applicable temperature scope: -70℃～+95℃
2.Hardness and elasticity, higher inner pressure strength, (Nominal stress:1.25MPa, burst pressure>4MPa, while 20℃.
3.In conformity with potable water hygienic standard, the pipe contains non-toxic components, not being rotten and breeding bacteria, it can be provided with the conveyance of potable water, purified water.
4.Higher chemical corrosion resistance and environmental stress cracking i.e. more kinds of chemical liquid can be conveyed.
5.Unprecedented advantages of pipe are being non-corrosive and non-incrustation, compared with common metal pipe.
6.With higher heat insulation and preservation properties, compared with metal pipe .
7.Having smoothness both inner and outer walls, the pipe have featured its smallest flow resistance. Attaining 30% of flow rate compared with zinc-plated steel pipe.
2.Major technical indicators of Ginde aluminum plastic composite pipe
Density ≥0.94g/cm³
Longitudinal recovery ratiio ≤3%
Crosslinked level ≥65%
Ourter appearance Smoothness both inner and outer appearances, free of san pit,bubble,as well as other deformities, in addition, even color, pointed groove, surface indentation not being allowed.
Vicat softening poit 123°c
Tensile strength ≥17%
Elongation at break ≥350
-45°c 24h No cracking,no leakage
Heat conductivity 0.35-0.46W/m*k
Liner expansion conefficient 0.2 mm/m*k
Та бидэнтэй ХАНГАН НИЙЛҮҮЛЭЛТИЙН ГЭРЭЭ хийснээр үйлчилгээ авна уу.
Хямд үнийн баталгаа:
Бусад нийлүүлэгч дээр илүү хямд байвал, зөрүү төлбөрийг эргүүлэн олгоно.
Хүргэлтийн хураамж/Бүх төрлийн бараанд/
2,500,000₮ -с дээш бараа захиалгад хүргэлттэй. Барааны овор хэмжээнээс шалтгаалж хүргэлтийн төлбөрийг тооцно
Овор ихтэй бараа болон, орон нутагт тухайлсан тээврийн зардал нэмж тооцно.
Specifications for PVP-X00-GINDE Труба Tybe PEX-B
| Хэмжээс | ф16*1.8 or ф16*2.0 or ф20*1.9 or ф20*2.0 or ф20*2.3 or ф25*2.3 or ф32*2,9 or ф32*3.6 |