PVF-X00-Ginde PVC 供水管道

I. Brief Introduction
Ginde has imported the most advanced technologies and equipment from Europe. We adopt high quality PVC resins and imported processing additives as the raw materials, with a scientific formulas to produce PVC-U supplying water pipes and fittings. Sales service net of our company products is all over China. It抯 one of Asia抯 largest pipes production base.
Our company owns 36 PVC-U production lines and over 100 injection-molding machines to produce fittings. Our products are of high quality, have various specifications and have passed strict inspections. Our products have passed the ISO 9001 Quality Management System Certificate and ISO 14001 Environmental Management System Certificate. Our products match the GB/T 10002.1-1996 and GB/T10002.2-2003 standards respectively.
Properties of Ginde PVC-U water supply pipelines
a)Light weight: weight in unit length is only 1/6 of the cast-iron pipes.
b)High strength: tensile strength comes to above 45MPa.
c)Less resistance: wall of the inner layer is smooth, prevents scum buildup. The water pressure and discharge of PVC-U pipe is 30% lower than cast pipes in the same diameter, and it can save the cost of discharge power.
d)Corrosion resistance: it has the excellent resistance to the corrosion caused by acid, alkaline, chemical and electricity. Stains will not occur.
e)Simple installation: connect easily with rubber rings. It is easy to carry out and seals well.
f)Long lifespan: under the normal working pressure, the lifespan reaches to 50 years.
g)Sanitary and non-toxic: it accords with the drinking water standard; the water is conveyed without secondary pollution.
h)Low cost: with lower cost of installation, transportation and raw material, the total cost of the whole engineering makes the cost 30% lower than cast pipes.
2.Major technical indicators of Ginde PVC-U water supply pipeline


Item
Technical index
Test method
Density
1350-1460kg/m3
Density measured in terms of GB1033
Vicar softening temperature
≥80℃
Vicat softening temperature measured in terms of GB8802
Vertical shrinkage tate
≤45℃
Vertical shrinkage rate measured in terms of GB6671.1
CH2C12 inners test(15℃,15min)
No change on the surface
CH2C12 immersion test measured in terms of GB/T13526